This procedure applies to Unitrends virtual systems running the legacy vaulting feature only. For virtual systems configured for replication, vault storage is not needed as replicated data is written to backup storage. You can vault to a SAN iSCSI LUN, an NFS-configured NAS share, or to a virtual disk.
Note: NAS shares configured with the CIFS protocol cannot be used for legacy vault storage.
1 | Select Settings > Storage and Retention > Storage. |
2 | Click Add Vault Storage. |
3 | Enter a name for the storage being configured in the Storage Name field. |
Note: Storage connected using the NFS, CIFS, or iSCSI protocols must not contain spaces in the name.
4 | Select the storage Type and continue to Configuring storage to configure iSCSI, NFS-configured NAS, or Added Disk (internal) storage. |