You are here: Hyper-V Protection > Instant recovery for Hyper-V > Configuring port security for Hyper-V instant recovery

Configuring port security for Hyper-V instant recovery

To perform an instant recovery, you must configure port security to No Security (Open All). If you prefer, you can change to a higher security setting after completing the recovery.

To configure port security for Hyper-V instant recovery

1 Log in to the Unitrends appliance that you will use for instant recovery.
2 Select Settings > Clients, Networking, and Notifications > Ports.
3 At the bottom of the screen, select No Security (Open All).
4 Enter the root password, and click Confirm.