Backup Copy - Cold Targets report
The Backup Copy - Cold Targets report summarizes information about each asset's backups that have been copied to cold storage within the selected date range for the selected appliance(s). Cold targets include: third-party cloud storage, attached disk storage, NAS and SAN storage, tape devices, eSATA devices, and USB devices.
After generating the report, you can view the details of a specific job by clicking it in the grid. This opens the Backup Copy Cold Targets Status Report Entry dialog.
When finished, click Report Categories in the upper left to return to the Available Reports page.
An example report is given here. Refer to the table below for a description of the available report columns. Not all columns display by default. To customize your output, click the icon to the right of the column header.
Report Field |
Field Description |
|||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Appliance Name |
The name of the backup appliance. |
|||||||||||||||||||||
App Name |
Application type:
|
|||||||||||||||||||||
Backup Copy Time |
The date and time when the backup copy job started. |
|||||||||||||||||||||
Elapsed Time |
The duration of the backup copy job, in hh:mm:ss format. |
|||||||||||||||||||||
Protected Asset |
The name of the asset protected by the backup. |
|||||||||||||||||||||
Instance |
Protected instance:
|
|||||||||||||||||||||
Backup Date |
The date and time the original backup job started. |
|||||||||||||||||||||
Type |
The type of backup that was copied: Full, Incremental, Differential, Synthetic Full, Selective, Bare Metal, Transaction (SQL only), or System Metadata. |
|||||||||||||||||||||
Compressed? |
Indicates whether the data is compressed: True (yes) or False (no). |
|||||||||||||||||||||
Job |
The name of the job. |
|||||||||||||||||||||
Target |
The name of the target on which the backup copy is stored. |
|||||||||||||||||||||
Deduplicated? |
Indicates whether the backup copy data has been deduplicated: True (yes) or False (no). |
|||||||||||||||||||||
Serials |
For tape, eSATA and USB devices, shows the serial numbers of the tapes or drives where the backup copy was written. |
|||||||||||||||||||||
Label |
For tape, eSATA and USB devices, shows the label assigned to the tapes or drives where the backup copy was written. |
|||||||||||||||||||||
Barcodes |
Barcodes of the tapes where the backup copy was written. (Applicable to tapes with barcode labels only.) |
|||||||||||||||||||||
Retention Days |
Minimum length of time the backup copy must be retained before it can be overwritten, in days. |