Conflict with volume using D:\ and the CD device on the virtual failover client
If the original client has multiple volumes and one is the D: drive, in Audit mode and Live mode, the CD device conflicts with the volume drive letter D:. Due to the volume conflict, the D: volume of the original client is mounted as a different drive letter or without a drive letter when the VFC is booted in Audit mode or Live mode.
To rectify the conflict, perform the following steps:
|
1
|
Connect to the virtual failover client (VFC) using VNC viewer. |
|
2
|
Open Disk Management by clicking Start, right-click on Computer, and select Manage. |
|
3
|
Select the CD/DVD device shown, right click and select Change Drive Letters and Path. |
|
4
|
Change the drive letter to an unused volume letter by clicking the Change button. |
|
5
|
Repeat the volume renaming process of the previous step for the data volume formerly known as D:. |