Trap History report
The Trap History report provides a list of all SNMP traps sent from the appliance over the selected date range. These traps are sent to Unitrends to enable proactive monitoring of the health of the appliance (if the necessary ports are open). You can also configure the appliance to send traps to your own network management server (for details, see SNMP trap notifications).
To view the report, select an appliance, enter a date range, and click Generate Report.
When finished, click Report Categories in the upper left to return to the Available Reports page.
An example report is given here. Refer to the table below for a description of the available report columns. Not all columns display by default. To customize your output, click the icon to the right of the column header.
Item |
Description |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Appliance ID |
ID of the appliance that ge the SNMP trap. |
|||||||||
Appliance Name |
Name of the appliance that sent the SNMP trap. |
|||||||||
Severity |
Severity of the issue:
|
|||||||||
Type |
Indicates the area impacted by the issue. Examples:
|
|||||||||
Status |
Status of the issue - Open (not yet resolved) or Closed (resolved). |
|||||||||
Date |
Date and time the trap was generated. |
|||||||||
Destination |
Address where the trap was sent. |
|||||||||
Description |
Detailed description of the condition that triggered the trap. |
|||||||||
OID |
Object ID of the trap. |
|||||||||
Object |
Name of the appliance or protected asset impacted by the issue. |
|||||||||
Community |
Indicates the community to which the trap notification was sent. Public by default. You can set up custom trap notifications and specify a different community setting. |