If restores for a virtual failover client (VFC) residing on an external hypervisor are not running, this problem could be caused by one of the following:
• | Virtual restores are not enabled for the VFC. For details, see Virtual restores are not enabled for the virtual failover client. |
• | The Unitrends appliance cannot communicate with the VFC. For details, see The Unitrends appliance cannot communicate with the virtual failover client. |
• | Configuration changes have been made to the original client. For details, see Configuration changes have been made to the original client. |
• | The VFC has been booted in live mode. For details, see The virtual failover client has been booted in live mode. |